Pack contents
• 1 x HSA6020 PIR motion detector
• 2 x wall plugs
• 1 x 2.6 mm (diameter) x 10 mm cross
head fixing screws.
• 2 x 3.5 mm x 15 mm wall plugs
PIR detector description
Status LED: Hidden red LED shines
through lens to indicate door contact
state
Learn/Test button: Used for testing the
radio performance (No sleep time) and
for learning-in.
Cover screw: Provides access to inside
of PIR
Tamper Spring: Spring loaded switch to
protect the PIR from being opened.
Tab Slot: Pull out plastic tab to activate
battery.
Corner fixing knockouts: Punch
through to provide holes for corner
fixing.
Wall fixing knockouts: Punch through
to pr
ovide holes for flat mounting on
walls.
Batteries X 3: Battery compartment for
three AAA 1.5V alkaline cells.
Wirefree Yale HSA6020
PIR motion detector
(Yale part number: 666020001001)
To Next Page
Need help?
General
