Yale Shaw-Box YK

SINGLE & DOUBLE GIRDER
TOP RUNNING BRIDGES
WITH INDIVIDUAL MOTOR DRIVEN
END TRUCKS
OPERATION, SERVICE
& PARTS MANUAL
SINGLE GIRDER RATED LOADS:
115 mm (4.5”) thru 305 mm (12.01”)
DOUBLE GIRDER RATED LOADS:
160 mm (6.3”) thru 305 mm (12.01”)
P/N: 11532620 REV. AA September 2018
YALE YK &
SHAWBOX SK ONLY
CMK_12322 Yale Rotating Axle End Truck Parts 11532619-REV AD_mec.indd 1 10/16/18 2:07 PM

Yale Shaw-Box YK Specifications

General

Brand	Yale
Model	Shaw-Box YK
Category	Grinder
Language	English

Summary

Installation and Setup

Installing Bridge Crane

Guidance on safely mounting the crane onto runway beams, including checks for fit and power supply.

Typical Connection of Bridge to Electrical Service

Explains the electrical hookup process, emphasizing safety precautions and code compliance.

Start-Up and Pre-Operational Inspection

Essential checks before initial operation, covering collectors, conductors, and bolted connections.

Operation and Safety

Operating Rules

Key safety guidelines for efficient and safe crane operation.

Operating Precautions

Crucial safety warnings and guidelines for using the bridge cranes, covering load limits and safe practices.

Operating the Crane

Step-by-step guide on how to safely operate the crane with and without loads, including speed control.

Maintenance and Repair

Gearmotor (Endtruck) Maintenance

Procedures for changing gearcase oil and maintenance for endtruck gearmotors.

Wheel and Bearing Removal & Replacement

Step-by-step guide for removing and replacing end truck wheels and bearings.

Replacement Parts

Warranty Information

Limitation of Warranties, Remedies and Damages