2
SINGLE & DOUBLE GIRDER TOP-RUNNING BRIDGES
WITH INDIVIDUAL MOTOR DRIVEN
END TRUCKS
P/N: 11532620 REV. AA September 2018
IMPORTANT
When ordering replacement parts be sure to include Catalog, Part and Serial Numbers of the endtrucks and or drive gearmotor along with
individual part numbers of components needed as identied elsewhere in this manual.
Information given in this manual is subject to change without notice.
FOREWORD
This manual contains important information to help you install, operate, maintain and service your new top running single or double girder
bridge crane. We recommend that you study its contents thoroughly before putting the bridge crane into use. With proper installation,
application of correct operating procedures, and practicing the recommended maintenance suggestions you will be assured of the maximum
service from your bridge crane.
The bridge cranes described in this manual are intended for indoor service. Bridge cranes to be used for outdoor service require special
considerations.
CMK_12322 Yale Rotating Axle End Truck Parts 11532619-REV AD_mec.indd 2 10/16/18 2:07 PM
To Next Page
Loading...