Yale SR-310 - Page 24

24
Adding & Using Devices
•
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
CHANGE
BATTERY
2 x 1.5v AA
CR 2032
(22)
(GB) Changing batteries - (IT) Sostituzione batterie - (DE) Batteriewechsel - (NO) Batteribytte -
(SE) Batteribyte - (DK) Batteriskift.
CR 2032
3 x 1.5v AAA
SR-KP
SR-DC
SR-PC
SR-PIR / PETPIR
1. Unscrew
2. Remove
3. Hold down number 3 at the same time as inserting
the new battery.
4. Replace cover
+ PIN CODE
Panic button
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
>3sec.<
+ PIN CODE
Panic button
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
>3sec.<
+ PIN CODE
Panic button
Press the 2 panic buttons together for
3 seconds to activate a panic alarm.
>3sec.<
Disarmed
Part Armed
Armed
Using your Panic Alarm
• Press the panic buttons together for 3 seconds to activate
the alarm.
• Deactivate a panic event by pressing the disarm button
followed by your PIN code.
If there is a system fault, you will need to press the Arm/
Home Arm button for a second time to “force arm” the
system.
Reset Key Pad Code
Reset to factory default (0000) using the following steps:
5. Initiliase your Key Pad. See previous page 9.
6. Learn this into your system.