YAMADA 140 Series User Manual

Doc. No. OSA 064U-08
High Viscosity Material Supply Pump Unit (Drum)
140 / 125 type series
SR140P25PDAL MODEL No.881113
SR140P38PDAL MODEL No.881114
SR140P50PDAL MODEL No.881115
SR125D13DAL MODEL No.881125
WARNING
Prior to operating this pump, be sure to read this operation manual for safety. After reading the manual, please keep it at hand
any time for your quick reference.
INSTRUCTION

YAMADA 140 Series Specifications

General

Series	140 Series
Category	Water Pump
Power Source	Electric
Maximum Flow Rate	140 L/min
Max Flow Rate	140 L/min
Voltage	220-240 V
Material	Cast Iron
Inlet/Outlet Size	1 inch
Frequency	50 Hz

Summary

Safety and Operation

Preface

Introduction and thank you for purchasing the Yamada Pump.

Warnings and Cautions

Explains hazard symbols, potential risks, and necessary precautions.

Precautions on Use

Important guidelines for safe and correct operation, covering various conditions.

Parts Identification

Part Names and Diagram

Illustrates and labels all components of the pump unit for reference.

Installation

Lift Installation

Instructions for positioning and securing the lift unit in the workspace.

Discharge Piping

Requirements for connecting the discharge hose and pipeline.

Air Piping

Details on selecting and connecting air supply hoses and fittings.

Pump Installation

Procedure for connecting and mounting the pump to the lift assembly.

Ground Wire Connection

Instructions for proper grounding to prevent static discharge.

Operation

Control and Valve Description

Explains the function and operation of various controls and valves on the unit.

Drum Placement

Step-by-step guide for positioning a drum for material transfer.

Material Transfer Operation

Detailed steps for operating the pump unit to transfer material.

Drum Replacement

Procedure for safely changing drums when material is depleted.

Post-Operation Shutdown

Instructions for proper shutdown and securing the unit after use.

Maintenance and Troubleshooting

Routine Maintenance Schedule

Daily, weekly, and annual checks and lubrication tasks for the pump and lift.

Troubleshooting Guide

Common problems, their possible causes, and recommended solutions.

Consumables Information

Information on parts that require regular replacement and their expected lifespan.

Standard Use Period

Specifies the expected operational life of the lift and inductor plate.

Parts and Specifications

Parts List Details

Detailed list of all parts with part numbers and quantities for different models.

Unit Specifications

Details product numbers, pump ratios, connections, pressure, noise, and weight.

Pump Specifications Reference

Refers to another manual for detailed pump specifications.

Dimensional Drawings

Provides dimensional drawings and mounting information for the unit.

Warranty Information