Need help?Do you have a question about the Yamaha 1990 FZR1000 and is the answer not in the manual?
General| Displacement | 1002 cc |
|---|---|
| Bore x Stroke | 75.5 mm x 56.0 mm |
| Transmission | 5-speed |
| Final Drive | Chain |
| Engine Type | Liquid-cooled, 4-stroke, DOHC, 5-valve, inline-four |
| Max Power | 145 hp @ 10, 000 rpm |
| Max Torque | 107 Nm @ 8, 500 rpm |
| Fuel System | 4 x 38mm Mikuni carburetors |
| Ignition | Digital TCI |
| Frame | Aluminum Deltabox |
| Front Suspension | Telescopic fork, adjustable preload, compression and rebound damping |
| Rear Suspension | adjustable preload, compression and rebound damping |
| Front Brakes | 2 x 298 mm discs, 4-piston calipers |
| Rear Brakes | Single disc |
| Front Tire | 120/70-ZR17 |
| Fuel Capacity | 20 liters |
| Dry Weight | 209 kg |
| Rear Tire | 170/60 ZR17 |
Assembly of front fairing, handlebar, and related components.
Installation of rear fender, tail light, license plate, and footrests.
Procedure for mounting the motorcycle seat.
Illustration detailing the routing of main electrical cables on the motorcycle.
Diagram showing cable routing around the handlebars and front section.
Recommended fuel type and tire pressure settings.
Procedure for setting the correct engine idle speed.
Instructions for brake fluid level and air bleeding.
Details on adjusting suspension damping and preload.
To Next Page