Do you have a question about the Yamaha 2002 TDM900 and is the answer not in the manual?
Displacement | 897 cc |
---|---|
Bore x Stroke | 92.0 mm x 67.5 mm |
Compression Ratio | 10.4:1 |
Fuel System | Fuel Injection |
Transmission | 5-speed |
Final Drive | Chain |
Front Suspension | Telescopic fork |
Rear Suspension | Swingarm |
Front Brake | Dual disc |
Rear Brake | Single disc |
Front Tire | 120/70 ZR18 |
Rear Tire | 160/60 ZR17 |
Fuel Capacity | 20 liters |
Seat Height | 825 mm |
Dry Weight | 190 kg |
Overall Length | 2, 180 mm |
Overall Width | 800 mm |
Overall Height | 1, 290 mm |
Wheelbase | 1, 485 mm |
Ground Clearance | 160 mm |
Engine Type | Liquid-cooled, 4-stroke, DOHC, parallel twin |
Ignition | Digital |
Maximum Power | 86 hp @ 7, 500 rpm |
Maximum Torque | 89 Nm @ 6, 000 rpm |
Detailed technical data and parameters for the engine.
Technical data for frame, wheels, tires, brakes, and suspension.
Technical data for electrical system components, bulbs, and fuses.
Standard tightening torques for common fasteners.
Maintenance and adjustment procedures for engine components.
Maintenance and adjustment procedures for chassis components.
Checks and adjustments for the motorcycle's electrical system.
Maintenance and replacement procedures for brake pads and related components.
Procedures for removing, checking, and installing front fork legs.
Procedures for removing, checking, and installing camshafts and related components.
Procedures for removing, checking, and installing the cylinder head.
Procedures for removing, checking, and installing valves, seats, guides, and springs.
Procedures for removing, checking, and installing cylinders, pistons, and rings.
Procedures for removing, checking, and installing clutch components.
Procedures for removing, checking, and installing the water pump.
Explanation of ECU self-diagnostics and error codes.
Guide for diagnosing and resolving common FI system issues.
Troubleshooting for the fuel injection system and its components.