Keyboard Arp & Drum Pad Owner’s Manual 6
3 EDIT, LEARN
To edit the settings for each Pad:
1) Tap [EDIT].
2) Tap the desired Pad to call up the Pad Edit window and the on-screen keyboard.
3) Make the settings including the note assignment as described below.
You can set the desired Note and Velocity also by tapping [LEARN] then pressing the key on the actual keyboard of the connected synthesizer.
L: The Note message is transmitted only
when you tap the left half section of the
Pad.
All:The Note message is transmitted when
you tap any location of the Pad.
R: The Note message is transmitted only
when you tap the right half section of
the Pad.
Clears all note assignments.
Tapping here calls up the on-screen keyboard
which lets you edit the Pad name.
Tapping here clears the note assignment.
To set the Note, tap the Note value then tap
the desired key in the on-screen keyboard.
To set the Velocity, tap the Velocity value or
values to call up the slider then adjust the
slider.
Finalizes the settings then closes the window.
To Next Page
Loading...
Need help?
General