Need help?Do you have a question about the Yamaha AVENTAGE RX-A1040 and is the answer not in the manual?
General| Receiver type | Surround |
|---|---|
| Output impedance | 8 Ω |
| Pre-out channels | 7.2 |
| 4Ω speaker support | Yes |
| Audio output channels | 7.2 channels |
| Total Harmonic Distortion (THD) | 0.06 % |
| Dynamic power per channel (4 Ohm) | 210 W |
| Dynamic power per channel (8 Ohm) | 135 W |
| Power output per channel (20-20KHz@8 Ohm) | 110 W |
| HDMI in | 9 |
| Audio (L/R) in | 11 |
| Remote (IR) input | 1 |
| Composite video in | 5 |
| USB ports quantity | 2 |
| Component video (YPbPr/YCbCr) in | 3 |
| Multichannel audio output type | Terminals |
| Speakers connectivity type | Clamp terminals |
| Supported radio bands | AM, FM |
| Optical drive included | No |
| Supported video modes | 1080i, 1080p, 480i, 480p, 576i, 576p, 720p |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio |
| Apple docking compatibility | Not supported |
| Power consumption (standby) | 0.1 W |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
Weight and Dimensions| Depth | 432 mm |
|---|---|
| Width | 435 mm |
| Height | 182 mm |
| Weight | 14900 g |
To Next Page