Need help?Do you have a question about the Yamaha AVENTAGE RX-A2080 and is the answer not in the manual?
General| Channels | 9.2 |
|---|---|
| HDMI Inputs | 7 |
| HDMI eARC | Yes |
| Phono Input | Yes |
| USB Input | 1 (Front) |
| Optical Inputs | 3 |
| Coaxial Inputs | 3 |
| Headphone Output | Yes |
| Wi-Fi | Yes (2.4 / 5 GHz) |
| Bluetooth | Yes (SBC / AAC) |
| Dimensions (W x H x D) | 435 x 192 x 474 mm |
| Power Output | 140 W (8 ohms, 0.06% THD) |
| Frequency Response | 10 Hz - 100 kHz (+0 dB, -3 dB) |
| HDMI Outputs | 3 |
| Preout | 11.2-ch |
| Video Features | 4K Ultra HD, HDR10, Dolby Vision, HLG, BT.2020 |
| Audio Features | Dolby Atmos, DTS:X, CINEMA DSP HD3 |
| Network Features | AirPlay, MusicCast |
Explains YPAO-R.S.C. for reflection control and YPAO Volume for low-volume sound.
Describes YPAO's 3D measurement for optimizing sound field effectiveness.
Outlines the general sequence of setup procedures for the unit.
Describes bi-amp, external amplifier, and multi-zone configurations.
Explains wiring for bi-amp front speakers and Zone2/3 speakers.
Instructions for connecting the unit to a network via cable.
Guidance on preparing the wireless antenna for network connection.
Selects measurement options like Multi Measure or Angle/Height.
Guides on performing YPAO measurement at one listening position.
Explains settings for multi-measure or single-measure YPAO calibration.
How to check YPAO measurement results and reload adjustments.
Instructions for connecting the unit to a wireless router.
Easy wireless setup using iOS device settings sharing.
Guides on manually setting up wireless connection via SSID and security.
Information on the MusicCast Controller app for setup and playback.
Procedure to add the unit to the MusicCast network.
Steps for basic playback of connected devices or radio stations.
How to select the HDMI output jack for video/audio output.
How to select and switch between registered SCENE settings.
Procedure for registering custom input source and settings to a SCENE.
Enabling SURROUND:AI for scene-optimized surround effects.
Selecting sound programs for movies/music and surround decoders.
Activating Pure Direct for high fidelity and Music Enhancer.
Enables playback in original channels without sound field processing.
Using surround decoders for unprocessed multichannel playback.
Activating Pure Direct mode for pure Hi-Fi sound quality.
Enhancing compressed music with depth and breadth.
Adjusts FM/AM tuning frequency steps based on country/region.
Guides on selecting frequency and registering favorite stations.
How to select preset stations and clear registered presets.
Procedure to clear all registered FM radio stations.
Guides on performing initial scan and selecting DAB stations.
Registering and clearing favorite DAB radio stations.
Steps to establish a Bluetooth connection for music playback.
Instructions for connecting a USB storage device to the unit.
How to operate and start playback of USB storage device contents.
Guides on configuring media sharing settings on PCs/NAS.
Instructions for listening to Internet radio stations.
Steps to play back iTunes/iPod music using AirPlay.
Steps to prepare the multi-zone system for audio playback.
Illustrates various ways to configure multi-zone setups.
Explains remote control signal transmission between Yamaha products.
Procedure to register favorite items for quick access.
How to recall registered items using shortcut numbers.
Lists and describes available settings in the Option menu.
Basic checks to perform before troubleshooting unit problems.
Troubleshooting issues related to power, system, and remote control.
To Next Page