Yamaha BANSHEE 350 - Headlight Beam Adjustment

8-45
>5. Install the bulb holder cover.
cC
Make sure the bulb holder cover is secure-
ly fitted over the bulb holder and seated
against the reflector.
6. Install the headlight unit assembly.
7. Adjust the headlight beam if necessary.
EBU01089
Headlight beam adjustment
cC
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the adjusting screw in
direction a.
To lower the beam, turn the adjusting screw in
direction b.
1. Adjusting screw
a
b
1
e
q
w
1. Bulb holder cover 2. Bulb holder
3. Reflector
3B5-9-10-03 3/31/05 1:37 PM Page 46