Yamaha BB NE2 User Manual

1.018K-661 Printed in Japan ’01.10
BB NE2
SERVICE MANUAL
EG
011597
ELECTRIC BASS
HAMAMATSU, JAPAN
CONTENTS
OVERALL ASSEMBLY ............................................ 2
ELECTRICAL PARTS ............................................ 4
CIRCUIT BOARD ........................................... 6
CIRCUIT DIAGRAM .................................................. 7
WIRING .................................................................... 8
SPECIFICATIONS ................................................. 8
This document is printed on chlorine free (ECF) paper with soy ink.
20011101-280000
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.

Yamaha BB NE2 Specifications

Body

body-neck construction	Through Neck
body material	Maple + Alder
body depth	51 mm

Fingerboard

fingerboard material	Ebony
fingerboard width at 0-F	43.0 mm
fingerboard width at 12-F	64.7 mm

Neck

neck material	Maple/Mahogany
neck thickness at 1-F	20.3 mm
neck thickness at 12-F	23.7 mm

Weight and Dimensions

scale length	864.0 mm
length	1156.5 mm
width	324.5 mm
net weight	4.3 kg