Yamaha C3 2007 - Specifications

8-1
1
2
3
4
5
6
7
8
9
SPECIFICATIONS
Specifications<IXE>
EAU26320
SPECIFICATIONS
Dimensions
Overall length
1905 mm (75.0 in)
Overall width
685 mm (27.0 in)
Overall height
1045 mm (41.1 in)
Seat height
735 mm (28.9 in)
Wheelbase
1280 mm (50.4 in)
Ground clearance
115 mm (4.53 in)
Minimum turning radius
2000 mm (78.7 in)
Weight
With oil and fuel
90.0 kg (198 lb)
Engine
Engine type
Liquid cooled 4-stroke, SOHC
Cylinder arrangement
Forward-inclined single cylinder
Displacement
49.0 cm
3
Bore x stroke
38.0 x 43.5 mm (1.50 x 1.71 in)
Compression ratio
12.00 :1
Starting system
Electric starter and kickstarter
Lubrication system
Wet sump
Engine oil
Type
SAE10W30 or SAE10W40
10 30 50 70 90
110
0
130
˚ F
-10 0 10 20 30
40
-20
50
˚ C
or SAE 10W-30
YAMALUBE 4 (10W-30)
YAMALUBE 4 (20W-40)
or SAE 20W-40
Recommended engine oil grade
API service SG type or higher, JASO
standard MA
Periodic oil change
0.78 L (0.82 US qt) (0.69 Imp.qt)
Final transmission oil
Type
SAE10W30 type SE motor oil
Quantity
0.10 L (0.11 US qt) (0.09 Imp.qt)
Cooling system
Coolant reservoir capacity (up to the maxi-
mum level mark)
0.26 L (0.27 US qt) (0.23 Imp.qt)
Radiator capacity (including all routes)
0.50 L (0.53 US qt) (0.44 Imp.qt)
Air filter
Air filter element
Wet element
Fuel
Recommended fuel
Unleaded gasoline only
Fuel tank capacity
4.5 L (1.19 US gal) (0.99 Imp.gal)
Fuel injector
Manufacturer
AISAN INDUSTRY
Model/quantity
3B3 / 1
Spark plug (s)
Manufacturer/model
NGK/CR7E
Spark plug gap
0.7-0.8 mm (0.028-0.031 in)
Clutch
Clutch type
Dry, centrifugal automatic
Transmission
Primary reduction system
Helical gear
Primary reduction ratio
50/13 (3.846)
Secondary reduction system
Helical gear
Secondary reduction ratio
43/12 (3.583)
Transmission type
V-belt automatic
Operation
Centrifugal automatic type
Chassis
Frame type
Steel tube backbone
Caster angle
26.00 degree
3B3-F8199-11_ch8.pmd 2007/07/30, 16:371