Yamaha C3 2008 - Handlebar Switches

3-22
1
2
3
4
5
6
7
8
9
EAU1044D
INSTRUMENT AND CONTROL FUNCTIONS
Handlebar switches<IXE>
Dimmer switch<IXE>
Turn signal switch<IXE>
Horn switch<IXE>
Engine stop switch<IXE>
Start switch<IXE>
EAU12347
Handlebar switches
Left
ZAUM00**
1
2
3
1. Dimmer switch "%/&"
2. Turn signal switch "4/6"
3. Horn switch "*"
Right
ZAUM00**
1
2
1. Engine stop switch "#/$"
2. Start switch ","
EAU12660
Engine stop switch “
##
##
#/
$$
$$
$”
Set this switch to “#” before starting the
engine. Set this switch to “$” to stop
the engine in case of an emergency,
such as when the motorcycle overturns
or when the throttle cable is stuck.
EAU12460
Turn signal switch “
44
44
4/
66
66
6”
To signal a right-hand turn, push this
switch to “6”. To signal a left-hand turn,
push this switch to “4”. When released,
the switch returns to the center position.
To cancel the turn signal lights, push the
switch in after it has returned to the cen-
ter position.
EAU12500
Horn switch “
**
**
*”
Press this switch to sound the horn.
EAU12400
Dimmer switch “
&&
&&
&/
%%
%%
%”
Set this switch to “&” for the high beam
and to “%” for the low beam.
EAUM1132
Start switch “
,,
,,
,”
Push this switch while applying the front
or rear brake to crank the engine with
the starter. See page 5-1 for starting in-
structions prior to starting the engine.
3-4