Yamaha Clavinova CLP-430 User Manual

OWNER’S MANUAL
IMPORTANT
— Check your power supply —
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a
voltage selector may be provided on the rear panel of the main keyboard unit near the power cord. Make sure that the voltage
selector is set for the voltage in your area. The voltage selector is set at 240V when the unit is initially shipped. To change the setting
use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
For information on assembling the instrument, refer to the instructions at the end of this manual.
CLP
-
470
CLP
-
440
CLP
-
430
CLP
-
S408
CLP
-
S406
CLP
-
465GP
EN

Yamaha Clavinova CLP-430 Specifications

General

Brand	Yamaha
Model	Clavinova CLP-430
Category	Electronic Keyboard
Language	English