What to do if no sound comes from my Yamaha DD-55 Drums?
If no sound is coming from the speakers of your Yamaha Drums, there might be several reasons: * The volume may be set too low, so adjust the volume. * A plug might be inserted into the PHONES/OUTPUT jack, so take the plug out. * The LOCAL ON/OFF might be set to OFF, so set the LOCAL ON/OFF to ON. * You may be in MIDI/Utility mode, so exit the MIDI/Utility mode.
Why is the LED display completely dark on my Yamaha DD-55?
If the LED display on your Yamaha Drums is completely dark, and returns to “000” when the pads are struck, it's likely that the batteries are low. Replace them immediately with a complete set of six new batteries. Alternatively, use an optional AC adaptor PA-5D or PA-5C to power the DD-55.
What to do if song or demo does not start playback on Yamaha DD-55 Drums?
If the song or demo does not start playback on your Yamaha Drums, the MIDI clock may have been set to “E” (external). Change the MIDI clock setting to “I” (internal).
Why does a buzz or click occur when turning Yamaha DD-55 Drums on or off?
A buzz or click that occurs momentarily when the Yamaha Drums is turned ON or OFF is a normal power surge noise that occurs when the POWER switch is operated.
General| Type | Electronic Drum Kit |
|---|---|
| Polyphony | 32 notes |
| Sequencer | Yes |
| Sequencer Tracks | 1 |
| Metronome | Yes |
| Number of Pads | 7 |
| MIDI | Yes |
| Power Supply | AC adapter or batteries |
| Connectivity | Headphones, MIDI In/Out, Aux In |
| Dimensions | 602 x 411 x 181 mm (23-3/4" x 16-3/16" x 7-1/8") |
| Weight | 5.1 kg (11 lbs 4 oz) |
Essential warnings to prevent serious injury or death from electrical shock, fire, or hazards.
Precautions regarding instrument handling, power, environment, and battery safety.
Information on using AC power adaptors and batteries for the DD-55.
Identifies and describes the controls on the front panel of the DD-55.
Instructions for playing the demo song, adjusting master volume, and song volume.
Details the names and functions of each pad and pedal, including hi-hat and bass drum operations.
How to activate Hand Percussion mode and select drum kits for pads and pedals.
Guide to assigning individual drum sounds to pads and pedals for the custom kit.
How to adjust pad sensitivity and resolve sound triggering issues.
Steps for recording original songs and playing them back.
Procedure to restore the DD-55 to its factory settings, including data that remains.
A guide to diagnosing and resolving common problems with the DD-55.
To Next Page
