What to do if no sound comes from Yamaha DD-50 Drums?
If no sound is coming from the speakers of your Yamaha Drums, check these possible causes: * Ensure the volume isn't set too low; adjust it accordingly. * If there's a plug in the PHONES/AUX. OUT jack, remove it. * Verify that the LOCAL ON/OFF setting is set to ON. * Make sure you are not in MIDI/Utility mode; exit if you are.
What to do if the LED display is dark on Yamaha Drums?
If the LED display on your Yamaha Drums is completely dark and returns to “00” when the pads are struck, it likely indicates that the batteries are low. Replace them immediately with a complete set of six new batteries. Alternatively, use the optional AC adaptor PA-3 or PA-3B to power the DD-50.
Why have custom pad voice assignments disappeared on Yamaha DD-50 Drums?
If the custom pad voice assignments on your Yamaha Drums have disappeared or defaulted, it could be due to low batteries. Replace the batteries with a complete set of six new ones. You can also use an optional AC adapter (PA-3 or PA-3B) to power the DD-50.
How to make the selected voice sound on Yamaha DD-50 Drums?
If the selected voice does not sound when you strike a pad on your Yamaha Drums, it means the desired voice hasn't been assigned to that pad. Use the PAD ASSIGN function to program the voice to the appropriate pad.
What to do if the song or demo does not start playback on Yamaha Drums?
If the song or demo does not start playback on your Yamaha Drums, the MIDI clock may be set to “E” (external). Change the MIDI clock setting to “I” (internal).
Why does a buzz or click occur when turning Yamaha DD-50 on or off?
This is a normal power surge noise that occurs when the POWER switch is operated.
General| Type | Electronic Drum Pad |
|---|---|
| Sound Engine | AWM (Advanced Wave Memory) |
| Polyphony | 32 notes |
| Drum Kits (Preset) | 50 |
| User Kits/Programs | 10 |
| Metronome | Yes |
| Tempo Range | 30 - 280 BPM |
| Display | LED |
| Sequencer | Yes |
| Connectivity | MIDI In/Out |
| MIDI | Out |
| Headphone Jack | Yes |
| Power Supply | 6 x AA batteries |
| Weight | 5.5 lbs |
| Number of Pads | 8 touch-sensitive pads |
Yamaha reserves the right to modify specifications without prior notice.
Service charges for user knowledge gaps are owner's responsibility.
Yamaha's commitment to user safety and environmental friendliness.
Important information regarding battery types, installation, and handling.
Guidelines for product disposal according to regulations.
Information on the location of the product's name plate for recording details.
Avoid conditions like direct sunlight, high temps, humidity, dust, and vibration.
Proper use of AC adaptor and turning off power when not in use.
Ensure all equipment power is off before connecting/disconnecting cables.
Tips for safe handling, unplugging cables, and avoiding physical shocks.
Instructions for cleaning the unit using a dry or slightly damp cloth.
Advice on preventing interference with radio/TV receivers.
Information on settings retained in memory when power is supplied.
Do not attempt self-repair; refer servicing to qualified personnel.
Instructions for powering the DD-50 via AC adaptor or batteries.
How to connect the optional Yamaha PA-3 or PA-3B AC adaptor.
Connecting headphones for private practice or external sound systems.
Step-by-step guide for installing six 'C' size batteries.
Overview and identification of controls on the front panel of the DD-50.
Identification of controls located on the left and right side panels.
How to connect the supplied foot pedals for playing drum voices.
List of items included with the DD-50.
How to adjust the overall volume level using the MASTER VOLUME buttons.
Adjusting the balance between song accompaniment and pad performance.
Explains the sounds assigned to each pad and pedal, including hi-hat control.
How to turn the reverb effect on/off and select depth levels.
Using the click feature as a metronome for timing practice.
Selecting and assigning one of the 20 preset or custom drum kits.
Customizing the "CU" kit by assigning individual drum voices to pads/pedals.
How to select a song from the 100 available and start playback.
Setting the feature that automatically matches drum kits to songs.
Setting the song tempo between 40 and 280 beats per minute.
Muting individual accompaniment tracks (Drum 1/2, Bass, Backing) for practice.
Setting tempo and starting song playback by tapping pads or pedals.
Adding solos or fills by muting accompaniment until the end of the measure.
Defining start (A) and end (B) points for practicing song sections.
Recording original songs using drum pads, pedals, and settings.
Playing back recorded custom songs.
Explains what MIDI is and its role in musical instrument communication.
Demonstrates connecting the DD-50 to keyboards, sequencers, and computers via MIDI.
Procedure for accessing and leaving the MIDI/Utility mode.
Configuring the internal or external clock for timing functions.
Determines if internal voices respond to pad input or only MIDI input.
Assigning MIDI channels for pads/pedals and songs.
Setting specific MIDI note numbers for each pad and pedal.
Restoring custom songs, kits, and settings to original factory defaults.
Details on which data is retained when power is supplied.
To Next Page
