
Do you have a question about the Yamaha Delight XC115S 2013 and is the answer not in the manual?
| Engine Type | Air-cooled, 4-stroke, SOHC, 2-valve |
|---|---|
| Displacement | 113 cc |
| Bore x Stroke | 50.0 mm x 57.9 mm |
| Compression Ratio | 9.3:1 |
| Fuel System | Carburetor |
| Starter System | Electric and Kick |
| Transmission | V-belt automatic |
| Front Suspension | Telescopic fork |
| Rear Suspension | Unit swing |
| Rear Brake | Drum |
| Front Tire | 70/90-14M/C 34P |
| Max Torque | 8.1 Nm @ 5000 rpm |
| Front Brake | Disc |
| Wheelbase | 1, 250 mm |
| Weight | 98 kg |
Owner's responsibility for safe and proper scooter operation.
Essential checks and practices for safe scooter operation.
Recommended clothing and gear for rider safety and protection.
Hazards of carbon monoxide and precautions for safe ventilation.
Identification of major components on the left side of the scooter.
Identification of major components on the right side of the scooter.
Overview and location of scooter controls and dashboard instruments.
Operation of the main switch and steering lock positions.
How to open and close the main switch keyhole cover.
Explanation of dashboard indicator and warning lights.
Description of the speedometer, odometer, and fuel meter functions.
Pre-operation check for fuel level and fuel line.
Pre-operation check for engine oil level and leakage.
Pre-operation checks for front brake operation, pads, and fluid.
Pre-operation checks for tire condition, tread depth, and air pressure.
Step-by-step guide to starting the scooter's engine.
Procedures for safely starting the scooter and setting off.
How to control scooter speed using the throttle grip.
Proper braking techniques and precautions, especially on wet roads.
Location and purpose of the owner's tool kit.
Schedule for emission control system maintenance tasks.
Schedule for general maintenance and lubrication of scooter components.
Procedures for removing and reinstalling body panels for maintenance.
How to check the spark plug condition and its significance.
Procedure for checking engine oil level and cleaning the oil strainer.
Procedure for checking and changing the final transmission oil.
Maintenance of air filter elements and V-belt case air filter.
How to adjust the throttle grip's free play for proper operation.
Importance of valve clearance and when it needs adjustment.
Essential information regarding tire maintenance and selection.
How to check and adjust the front brake lever free play.
How to check and adjust the rear brake lever free play.
Procedure for checking wear on brake pads and shoes.
How to check brake fluid level and importance of maintaining it.
Recommended intervals and procedure for changing brake fluid.
How to check and lubricate control cables for smooth operation.
Maintenance of throttle grip and cable for smooth operation.
Lubrication points for front and rear brake levers.
Maintenance of centerstand and sidestand pivots.
How to check the condition and operation of the front fork.
Procedure for checking steering bearings for wear or looseness.
How to check front and rear wheel bearings for play or smoothness.
Information about the VRLA battery and checking connections.
Procedure for replacing a blown fuse with the correct amperage.
Step-by-step guide to replacing the headlight bulb.
How to replace tail/brake and rear turn signal light bulbs.
Procedure for replacing a front turn signal light bulb.
Overview of common scooter problems and troubleshooting steps.
A diagnostic chart for identifying and resolving common scooter issues.
Precautions for cleaning and maintaining matte finished parts.
General guidelines for cleaning and maintaining the scooter's appearance.
Instructions for short-term and long-term storage of the scooter.
Physical measurements and curb weight of the scooter.
Key engine specifications and details.
Type and operation of the clutch and transmission systems.
Specifications for the frame, caster angle, and trail.
Maximum load capacity and recommended tire pressures.
Specifications for wheels, brakes, and suspension systems.
Details of electrical systems, battery, and lighting.
Location and importance of vehicle identification and model labels.











