Yamaha DSP-1 - BATTERY REPLACEMENT

Mi BATTERY REPLACEMENT
When the remote controllable distance becomes
short, batteries are exhausted. Replace two batteries
with new ones.
Battery cautions
Incorrect use of the battery may cause leakage or
explosion. Be careful the following items:
When replacing:
è Place the batteries in correct (+) and (—) polarities
as indicated in the battery compartment.
è Do not use the old battery together with new one.
® Do not use the different kind of batteries at the
same time even though in the same shape.
Rechargeabie batteries:
e There are two kinds of batteries in the market:
rechargeable and non-rechargeable. Read the
caution labeles on the battery carefully.
Use with the remote control transmitter:
® When not in use for an extended period of time,
remove the batteries from the remote control
transmitter.
® Replace the exhausted batteries earlier in good
time.
To prevent accident:
® Never disassemble, heat the battery, or throw into
the fire. Dispose the batteries in the specified
places.
e Do not connect (short) (+) and (~) directly with the
metal piece, etc.
in case of leakage:
Wipe off the electrolyte in the battery compartment
completely before replace with the new batteries.
LSP