Do you have a question about the Yamaha DT501988 and is the answer not in the manual?
Year | 1988 |
---|---|
Manufacturer | Yamaha |
Model | DT50 |
Displacement | 49 cc |
Fuel System | Carburetor |
Ignition | CDI |
Final Drive | Chain |
Front Suspension | Telescopic fork |
Front Brake | Drum |
Rear Brake | Drum |
Engine Type | Single-cylinder, two-stroke |
Bore x Stroke | 40.0 mm x 39.2 mm |
Starting System | Kick |
Rear Suspension | Swingarm |
Record your key identification number for reference.
Record your vehicle identification number for ordering parts or reference.
Record your engine serial number for ordering parts or reference.
Controls ignition and lighting systems; operation of OFF, ON, and LOCK positions.
Explains the function of turn, neutral, oil warning, and high beam indicator lights.
Step-by-step procedure to check the oil warning light functionality.
Details the speedometer, odometer, and tachometer functions and the red zone warning.
Indicates coolant temperature; warns to stop if needle reaches red zone.
Describes the operation of the lights (dimmer), horn, and turn signal switches.
Location and operation of the clutch lever for engaging/disengaging the clutch.
Operation of the gear shift pedal for changing gears in the transmission.
Location and operation of the front brake lever.
Location and operation of the rear brake pedal.
Explains the three positions (OFF, ON, RES) of the fuel cock.
Operation of the starter knob for richer fuel mixture during cold starts.
Procedure for starting the engine using the kick starter.
How to lock and unlock the steering using the main switch key.
Procedure for opening and locking the helmet holder.
Description of the sidestand and its ignition cut-off system.
Steps to verify the correct functioning of the sidestand switch.
Describes the tools provided and the need for a torque wrench.
Procedures for thoroughly cleaning the motorcycle.
Preventive procedures for long-term storage to guard against deterioration.