Yamaha EAD10 User Manual (English)

Other manuals for Yamaha EAD10

Owner's Manual72 pages

Reference Manual60 pages

Questions and Answers:

K
kgillAug 17, 2025
How to fix no sound on my Yamaha EAD10?
- C
  Christopher HerreraAug 17, 2025
  If you're not getting any sound from your Yamaha Music Equipment, there are several things to check: * Ensure the EAD10 is turned on. * Verify the [MASTER VOLUME] knob is properly adjusted. * Confirm the Sensor Unit and Main Unit are correctly connected with a stereo phone cable and that the cable is in good condition. * Ensure the Main Unit is properly connected to headphones or other audio equipment, like an amplifier or speakers. * Check that the ”A” cable is connected to the [A] jacks, and the “B” cable is connected to the [B] jacks. * Also, check the power and volume settings on any external devices.
A
Anita FordAug 19, 2025
What to do if the sound is distorted on my Yamaha EAD10 Music Equipment?
- E
  edward83Aug 19, 2025
  If the sound from your Yamaha Music Equipment is distorted, it could be due to several reasons. First, try pressing the [ ] button and adjusting the mic sensor settings, as the mic gain level may be too high. Also, check the [MASTER VOLUME] knob and turn it to the left if it's set too high. Finally, if an effect is applied, adjust the distortion or other effect settings.
D
Dr. Eric Weeks Jr.Aug 22, 2025
Why is the volume balance poor on my Yamaha Music Equipment?
- D
  Diane WintersAug 22, 2025
  Poor volume balance on your Yamaha Music Equipment can be addressed by: * Adjusting the Trigger Sound volume and, if needed, the mic gain. * Adjusting the volume on the device connected to the [AUX IN] jack and the [AUDIO/CLICK VOLUME] knob. * Checking the positions of drums and cymbals in the drum set, as instruments placed far from the Sensor Unit may sound low in volume. * Trying the automatic setting to set up the Sensor Unit if the trigger settings are improper. * Ensuring the Sensor Unit is properly attached to the hoop.
C
Cole BrownAug 25, 2025
How to eliminate noise from Yamaha EAD10?
- M
  Madison ChavezAug 26, 2025
  To reduce noise in your Yamaha Music Equipment: * Secure the cables close to the Sensor Unit using the supplied cable band tape to prevent movement. * Make sure the Sensor Unit is properly attached to the hoop. * Secure the cable connected to the [B] jack (Mic Sensor cable) on the Main Unit using the supplied cable bands.
L
Luis BoydAug 28, 2025
What causes double triggering on Yamaha Music Equipment?
- J
  Joseph ChambersAug 28, 2025
  Double triggering on your Yamaha Music Equipment, where multiple sounds are produced from a single strike, can be caused by: * The Sensor Unit not being properly attached to the hoop. Ensure it is securely fastened. * Excessive vibration of the bass drum head. Adjust the bass drum to produce a shorter sound by muting, tuning, or changing the head.
J
James DoyleAug 31, 2025
Why are setting changes hard to notice on Yamaha EAD10 Music Equipment?
- T
  Todd JohnsonAug 31, 2025
  If it's hard to notice changes to settings on your Yamaha Music Equipment, it might be because the Reverb/Effect level or Trigger Sound volume is too low. Try turning the [REVERB] knob, [EFFECT] knob, or [TRIGGER] knob to the right to adjust depth or volume. Also, the Mic Gain might be set too low; try using the automatic setting to set up the Sensor Unit. Using highly-efficient headphones, closed-ear headphones, or ear-phones may also help.
S
salazarjamieSep 2, 2025
What to do if audio files won't play from USB on Yamaha Music Equipment?
- J
  Jesus HayesSep 2, 2025
  If your Yamaha Music Equipment isn't playing audio files from a USB flash drive, it could be due to an unsupported file format. Check the file format and sampling frequency. Also, the USB flash drive performance might be insufficient; it's recommended to use a USB flash drive of 4GB or more.
J
Joseph GonzalesSep 5, 2025
Why is the volume low when playing USB audio files on my Yamaha EAD10?
- S
  Scott HumphreySep 5, 2025
  If audio files recorded on a USB flash drive have low volume when playing back on the Main Unit, adjust the volume to an appropriate level when recording. During playback, adjust the [AUDIO/CLICK VOLUME] knob.
C
Christopher CooperSep 7, 2025
Why can't I record on my Yamaha Music Equipment Main Unit?
- S
  Sandra ThompsonSep 7, 2025
  The sound of your performance and the audio from the AUX IN cannot be recorded simultaneously. Audio from the AUX IN must first be recorded to the Main Unit, then you can overdub your performance onto the song.
T
Tiffany CharlesSep 12, 2025
Why does my Yamaha EAD10 Music Equipment power off unexpectedly?
- N
  Natasha AndersonSep 12, 2025
  If your Yamaha Music Equipment is turning off unexpectedly, the Auto Power-Off function may be enabled. Disable the Auto Power-Off function to prevent this.

Yamaha EAD10 Specifications

General

Weight	Module: 650 g, Trigger sensor unit: 464 g
Sampling Frequency	44.1 kHz
A/D Conversion	24-bit
D/A Conversion	24-bit
Trigger Inputs	2
USB	USB to host
Effects	Reverb, Delay, Chorus, Flanger, Phaser, and more
Inputs	2 x Trigger Inputs