To Next PageTo Next Page
Need help?Do you have a question about the Yamaha SILENT SLG200S and is the answer not in the manual?
General| Type | Silent Guitar |
|---|---|
| Body Material | Mahogany |
| Neck Material | Mahogany |
| Fingerboard Material | Rosewood |
| Pickup System | SRT Powered System |
| Frame Material | Rosewood & Maple |
| Bridge Material | Rosewood |
| Nut Material | Urea |
| String Spacing | 11 mm |
| Electronics | SRT Powered System |
| Chromatic Tuner | Yes |
| SRT Blend | Yes |
| Scale Length | 634 mm |
| Power Supply | AA batteries x 2 or AC adapter |
| Total Length | 978 mm |
| Body Width | 356 mm |
| Fingerboard Radius | 400 mm |
| Nut Width | 43 mm |
| Included Accessories | Stereo earphones, 2 AA batteries |
| Color | Natural, Translucent Black |
| Connectivity | Line Out, Aux In, Phones |
| Connections | Line Out, Aux In, Phones |
Important safety instructions, service disclaimers, and product handling advice.
Warning regarding chemicals known to cause cancer or birth defects.
Detailed technical specifications including materials, dimensions, and power requirements.
Diagrams identifying guitar components from front and rear views.
Diagram identifying all controls, switches, and connectors on the control panel.
Diagram showing the physical arrangement of the main, PN, and PH circuit boards.
Step-by-step guide for removing the guitar's frame, horn, and brackets.
Steps for removing the control panel and the main circuit board.
Instructions for detaching the PH and PN circuit boards from the unit.
Procedure for removing the jack plate assembly from the guitar.
Identification and schematic references for the MAIN, PN, and PH circuit boards.
Procedures for setting and verifying the guitar's model number via controls.
List of necessary equipment and preparation steps for product inspections.
Method to check the guitar's model and firmware version.
Verifying string volume balance, sound quality, and detecting unwanted noises.
Evaluating the sound quality produced by the microphone simulator function.
Assessing effects, PHONES jack, and AUX jack functionality.
Ensuring volume and effect controls operate smoothly without noise.
Verifying jack output, noise levels, tuner operation, and AC adapter functionality.
Checking control movement and confirming factory default settings.
Lists for overall assembly, electrical assembly, and detailed electrical components.
Diagrams showing the exploded views of the guitar from front and rear.
Listing of mechanical parts, their descriptions, and quantities.
Diagram illustrating the assembly of the guitar's electrical components.
Listing of components specific to the electrical assembly and their part numbers.
Detailed lists of electronic parts for the MAIN, PN, and PH circuit boards.
Guide on understanding the block diagram and circuit diagram symbols.
Diagram illustrating the overall signal flow and interconnections between major components.
Detailed schematics for the main circuit board, sections 001 and 002.
Detailed schematic for the main circuit board, section 003.
Detailed schematics for the PN and PH circuit boards.
