Need help?Do you have a question about the Yamaha EMP700 and is the answer not in the manual?
General| A/D Conversion | 16-bit |
|---|---|
| D/A Conversion | 16-bit |
| Sampling Frequency | 44.1 kHz |
| Frequency Response | 20 Hz - 20 kHz |
| MIDI | In, Out, Thru |
| Power Consumption | 15W |
| Type | Digital Multi-Effect Processor |
| Effects | Reverb, Delay, Pitch |
| Input Impedance | 10 kOhms |
| Output Impedance | 600 Ohms |
| Display | LCD |
| Inputs | 2 x 1/4 inch |
| Outputs | 2 x 1/4 inch |
Details FCC requirements for Class B digital devices in the USA.
Confirms compliance with Canadian radio noise emission limits.
Instructions for connecting the mains lead and ensuring apparatus earthing.
Notice regarding lead in solder and potential chemical content.
Guidance on avoiding heat, humidity, dust, vibration, and physical shocks.
Prohibits user repairs and emphasizes powering off before connections.
Safe cable handling, correct power supply use, and electrical interference advice.
Advice on MIDI cables, memory backup battery, and error number interpretation.
Using the -20dB/+4dB switch for input sensitivity and output level.
Explains the use of INPUT R and L(MONO) jacks for stereo/mono signals.
Describes the OUTPUT R and L jacks for stereo sound system connection.
Details the TAP TEMPO/BYPASS jack for optional footswitch connection.
Explains the MIDI IN connector for receiving MIDI signals.
Describes the MIDI OUT/THRU switch for THRU or OUT operation.
Instructions for turning the unit on and off.
Dual concentric controls for setting input sensitivity.
Indicators for setting optimal input levels and avoiding distortion.
LEDs indicating selected memory area: PRESET, USER, or CARD.
Indicator that flashes when a MIDI signal is received.
LED display showing selected program number.
Main display for information on program selection and utility control.
Four keys for one-touch program selection and parameter editing.
Keys for stepwise selection of programs and parameter values.
Details PRESET, USER, and CARD memory configurations.
Procedure for selecting memory area and program number.
Solutions for power-on failures, humming, and noise problems.
Troubleshooting for no effect sound, STORE, Tap Tempo, and MIDI selection.
To Next Page
