Yamaha EMX5000-12 User Manual

Owner’s Manual
E
Keep This Manual For Future Reference.

Yamaha EMX5000-12 Specifications

General

Type	Powered Mixer
Channels	12
Power	500W
Total Output Power	500W
Frequency Response	20 Hz - 20 kHz
Phantom Power	Yes
EQ	3-band EQ
Effects	Digital effects processor
Input Impedance	10k ohms

Summary

Owner's Manual Revisions

Power Amp Section Details

Explains the LIMITER indicator and its function for the power amplifier section.

Indicators and Controls Overview

Describes the Level Meter and its role in monitoring signal levels.

Rear Panel Speaker Outputs

Details the SPEAKERS jacks on the rear panel and their connection types.

Block/Level Diagram Explanation

Provides a textual explanation of the block/level diagram.

Detailed Block/Level Diagram

FCC Compliance and Safety Symbols

FCC Warning Notices

Important notices regarding unit modification, cable usage, and FCC compliance testing.

Electrical Safety Cautions

Warnings about risk of electric shock and the need for qualified servicing.

Graphical Symbol Explanations

Explains the meaning of the lightning flash and exclamation point symbols.

General Precautions and Warnings

Installation Safety Guidelines

Advice on proper unit installation, including placement, ventilation, and avoiding liquids.

Operation Safety Guidelines

Guidelines for safe operation, covering power cords, unit modification, and lightning procedures.

Operational Precautions and Interference

Operation Precautions

Details on connector pin assignments and the wear of components with moving contacts.

Correct Operation Advice

Guidance on minimizing cell phone noise and avoiding interference with other electronic devices.

Introduction and Key Features

Product Features Overview

Lists the versatile inputs, power output, effects, and EEEngine technology of the mixer.

Quick Start Guide: Connections

Speaker Connection Basics

Step-by-step guide for connecting speakers to the unit's rear panel jacks.

Power Amplifier Mode Setup

Instructions for setting the power amplifier mode for stereo operation.

Quick Start Guide: Input Connections

Microphone and Condenser Mic Connection

How to connect microphones, including phantom power usage for condenser mics.

Connecting Audio Sources

Guidance on connecting CD players, cassette decks, and guitars to the unit.

Quick Start Guide: Power Up and Sound Output

Connecting Musical Instruments

Steps for connecting electronic musical instruments like synthesizers and drum machines.

Power On Sequence and Gain Adjustment

Proper power-on sequence and adjusting channel GAIN controls for optimal input levels.

Sound Output Level Adjustment

How to adjust ST OUT and channel faders for proper speaker volume.

Quick Start Guide: Effects and Power Off

Applying Built-in Effects

Steps for selecting and applying the built-in digital effects.

Power Off Sequence

The correct procedure for powering down the unit and connected devices.

Control Panel: Channel Controls Overview

Channel Input Controls

Details on the 26dB pad, GAIN control, and High Pass Filter switch.

Channel Equalizer Controls

Explanation of the 3-band EQ for HIGH, MID, and LOW frequencies.

Control Panel: Channel & Input Details

AUX, Effect Send, and Panning Controls

Controls for routing signals to AUX and Effect buses, and stereo positioning (PAN/BAL).

Channel Status Indicators

Description of ON, PEAK, SIGNAL, and PHANTOM indicators for each channel.

Stereo Sub Input Controls

Controls for adjusting levels from stereo sub inputs to AUX and STEREO buses.

Control Panel: Output Routing and Master Controls

PFL/AFL Switches and Channel Faders

Functions of PFL/AFL switches for monitoring and channel faders for level control.

Master Output Faders

Adjusting final output levels for AUX, MONO, and STEREO buses.

2TR IN Section Controls

Controls for the 2TR IN jacks, including stereo level and PFL.

Control Panel: Effects and System Indicators

Digital Effect Section Controls

Controls for selecting, adjusting, and returning digital effects, including TAP delay.

System Indicators and Utilities

Description of POWER, SPEAKER PROCESSING, STAND-BY, Peak Level, PHONES, ST SUB OUT, and LPF controls.

Control Panel: Equalization and Power Amplification

Graphic Equalizer Functionality

Details on the 9-band graphic equalizer for tone adjustment.

Power Amplifier Section Settings

Settings for the LIMITER indicator, power amp select switch, and maximum output level.

Control Panel: System Indicators and Processing

Power and Speaker Processing Indicators

Explains the POWER, SPEAKER PROCESSING, and STAND-BY indicator lights.

Monitoring and Output Controls

Covers the Peak Level meter, PHONES control, ST SUB OUT, and LPF controls.

Input/Output Panel Connectors Part 1

Channel Input Jacks

Detailed description of INPUT A (XLR) and INPUT B (TRS) jacks and their specifications.

Insert I/O Jacks

Information on the INSERT jacks for connecting external processors via Y-cables.

Input/Output Panel Connectors Part 2

Phantom Power and Line Inputs

Details on the PHANTOM switch and LINE input jacks for various instruments.

Digital and Recording Outputs

Describes the 2TR IN jacks for external devices and REC OUT jacks for recording.

Auxiliary, Effect, and Main Outputs

Explains AUX SEND, EFFECT SEND, ST OUT, ST SUB OUT, P.AMP IN, MONO OUT, PHONES, and FOOT SW jacks.

Input/Output Panel and Rear Panel

Foot Switch and Lamp Jacks

Details on FOOT SW (TAP) and LAMP jacks for external control and lighting.

Rear Panel Connections

Explains the AC IN inlet, POWER switch, and SPEAKERS output jacks on the rear panel.

Installation and Connection Guide

Unit Installation Requirements

Guidelines for installing the unit, ensuring proper ventilation and clearance.

General Connection Advice

General recommendations for using correctly rated cables for connections.

Connecting Main Speakers

Instructions on connecting main speakers, including impedance considerations for different modes.

Speaker Connection Configurations

Two Channel Parallel Speaker Connections

How to connect two speakers in parallel to SPEAKERS A and B jacks, with impedance details.

Mono Bridge Speaker Connection

Guidelines for bridge connection, including caution about connecting speakers to specific jacks.

Comprehensive Input/Output Connection Diagram

Practical Example Setups

Conference/Entertainment Hall System Setup

An example setup for using the mixer in a conference or hall environment.

Conference System Setup Details

Conference System Connections

Specific connection details for the conference/entertainment hall system setup.

CD Player Playback for Conference

Steps for playing back a CD player within the conference system setup.

Band PA System Example

Band PA System Configuration and Effects

Band PA System Connections

Specific connection details for a small band PA system setup.

Independent Monitor Mix Setup

How to create an independent monitor mix using AUX 1.

Using External Effect Processors

Steps for integrating external effect processors with the mixer.

Subwoofer Integration Example

Troubleshooting Common Issues

Power and Output Problems

Addresses issues like no sound output or dark power indicators and their solutions.

Powered Mixer Q&A

Common questions and answers regarding the mixer's functionality and potential problems.

Product Specifications Overview

General Specifications Table

Provides general technical specifications including maximum output power and frequency response.

Input and Output Specifications

Input Level and Impedance Details

Comprehensive table detailing input levels, impedances, and connector types.

Output Level and Impedance Details

Comprehensive table detailing output levels, impedances, and connector types.

Technical Specifications and Rack Mounting

Dimensions and Weight

Physical dimensions and weight specifications for the EMX5000 models.

Optional Rack Mount Kit Installation

Instructions for installing an optional rack mount kit for the unit.

Technical Block/Level Diagram