To Next Page
M
Mary HartJul 25, 2025
What to do if sound is no longer output from the speakers of my Yamaha EMX62M?
- CChristian WoodJul 26, 2025
If your Yamaha Music Mixer stops outputting sound from the speakers, it might be due to the amplifier's protection circuit activating because of excessive load. Wait for the device to cool down, and it should resume normal operation automatically. To prevent this from happening again: * Reduce the level setting if it's too high, using the peak level indicators as a guide. * Ensure adequate ventilation, referring to the manual's cautions. * Check the load impedance (including shorts) against the rear panel specifications (page 14) and correct the connections if necessary.
General
