Need help?Do you have a question about the Yamaha EMX 5000-20 and is the answer not in the manual?
General| Brand | Yamaha |
|---|---|
| Model | EMX 5000-20 |
| Category | Music Mixer |
| Language | English |
Details FCC compliance and installation guidelines for USA users.
Explains warning symbols used in the manual for user safety and operation.
Covers electrical shock, fire hazards, and improper use of the unit.
Advises on placement, ventilation, and handling to prevent damage or hazards.
Details specific operational guidelines and connector pin assignments.
Addresses interference, volume settings, and proper equipment interaction.
Welcomes the user and encourages careful reading of the manual for optimal performance.
Highlights the mixer's capabilities, including versatile inputs, power, and built-in effects.
Guides on connecting speakers to the unit, including impedance considerations.
Explains how to select stereo or mono operation for the power amplifier.
Details connecting microphones, condenser mics, audio players, guitars, and basses.
Guides on powering on the unit and adjusting sound output levels and tone.
Details how to use built-in effects and the correct power-off procedure.
Details the various controls and sections on the mixer's front panel.
Explains adjustments for equalization, volume, and effect levels per channel.
Covers final output level adjustments for AUX, MONO, and STEREO buses.
Details all input and output jacks, their types, and functions.
Provides guidance on unit placement and ensuring adequate cooling.
Explains speaker connection methods, impedance, and power amp select switch settings.
Details how to connect a single speaker for high-output mono bridging.
Guides on connecting and setting up microphones and instruments.
Explains how to select, adjust, and apply the built-in digital effects.
Lists all available digital effects, their descriptions, and controllable parameters.
Illustrates setting up the mixer for a conference or entertainment hall.
Shows a typical setup for a small band PA, including monitor mixes.
Demonstrates how to integrate a subwoofer using the low-pass filter.
Addresses issues like no sound output and provides troubleshooting steps.
Answers frequently asked questions about effects, monitoring, and connections.
Lists key technical details like output power, frequency response, and hum/noise.
Details input/output levels, impedance, and connector types.
Provides physical dimensions and instructions for installing an optional rack mount kit.
To Next Page
