Yamaha EPH-WS01 - Using the Ear Cuffs

2
En
Using the ear cuffs
There is one ear cuff each for the left and right ears.
1
Pass the cable through the ear cuff’s cable retainer.
Cable retainer
4–5 cm (approximate)
2
Place the ear cuff on your ear so that the protruding tab of the
ear cuff is behind your ear.
The cable should pass through the cable retainer and hang down behind
your ear.
2
3
Tab goes
behind your ear
3
Adjust the length of the cable, and insert the earphones into
your ear.