Need help?Do you have a question about the Yamaha F100TLRZ and is the answer not in the manual?
General| Horsepower | 100 hp |
|---|---|
| Prop Shaft Horsepower | 100 hp |
| Fuel System | EFI (Electronic Fuel Injection) |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Gear Shift | F-N-R |
| Shaft Length | 20 in |
| Alternator Output | 35 Amp |
| Steering | Remote |
| Displacement | 1832 cc |
| Exhaust | Through Propeller |
| Cooling | Water Cooled |
| Ignition | TCI |
| Recommended Engine Oil | Yamalube 4M |
| Trim Method | Power Trim & Tilt |
| Fuel Recommendation | Regular Unleaded (Minimum 87 Octane) |
| Engine Type | 4-Stroke, DOHC, 16-Valve In-Line 4 |
Lists the standard equipment included with 2001 Yamaha outboard motors as of the publication date.
Details the shipping location for propellers, controls, fuel tanks, and rigging items.
Provides information on available rigging kits for 2001 Yamaha outboard motors.
Provides specific dimensions for mounting outboard motors on a transom.
Illustrates the hole patterns for mounting outboard motors to a transom.
Covers mounting, maintenance, shift cable instructions, and service information specific to Jet Drive engines.
Provides instructions for installing a tie bar kit for dual engine setups.
Details the installation process for dual cable steering bracket kits.
Offers installation instructions for Morse Universal Dual Cable Steering Bracket Kits.
Lists and describes various wire harnesses used in outboard rigging.
Details different switch panel assemblies, their functions, and part numbers.
Covers the procedures for installing batteries and connecting battery cables.
Explains the function and installation of the rectifier for 6 to 25 HP engines.
Describes the function and installation of the voltage regulator for powering lights without a battery.
Explains the installation and function of the neutral safety switch for 30HP models.
Covers the installation of the remote power trim and tilt switch for various engine models.
Provides various wiring diagrams for common remote control configurations.
Offers comprehensive boat wiring diagrams for different engine setups.
Lists different types of control boxes, their part numbers, and basic functions.
Details the function, types, and installation of tachometers for performance monitoring.
Explains the operation and calibration of Yamaha speedometers.
Discusses Yamaha's propeller design philosophy and available materials like plastic, aluminum, and stainless steel.
Provides charts for selecting propellers based on engine HP, pitch, description, and material.
Provides installation instructions for the 6X1 Dual Station System.
Offers service information and procedures for the 6X1 Dual Station System.
To Next Page
