Why does my Yamaha F225C Outboard Motor trim gauge always show fully tilted up?
If the trim gauge always shows the fully tilted-up position, the trim sensor signal isn't being received. Connect the pink lead connectors with each other.
Why doesn't my Yamaha F225C Outboard Motor boat speed gauge show?
If the boat speed and/or coolant pressure gauge isn't showing, it means the optional sensor hasn't been installed. Install the optional sensor to fix this.
General| Max Power Output | 225 HP |
|---|---|
| Prop Shaft Horsepower | 225 HP |
| Full Throttle RPM Range | 5000 - 6000 RPM |
| Gear Ratio | 1.86:1 |
| Cooling System | Water-Cooled |
| Starting System | Electric |
| Steering | Remote |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Alternator Output | 50 Amp |
| Shaft Length | 25 in (635 mm) |
| Engine Type | 4-stroke, SOHC, 4-valve |
To Next Page
