What to do if Yamaha Outboard Motor trim gauge always shows fully tilted up position?
If the trim gauge always shows a fully tilted-up position, the trim sender signal is not being received. Connect the pink lead connectors to each other.
Why Yamaha Outboard Motor boat speed and/or coolant pressure gauge does not show?
If the boat speed and/or coolant pressure gauge does not show, it is likely that the optional sensor has not been installed. Install the optional sensor.
How to setup Yamaha Outboard Motor tachometer to show the oil pressure?
Select the oil press. display.
Defines the meaning and severity of warning, caution, and note indicators.
Essential safety precautions for operating the outboard motor.
Explains warning indicators, tachometer, trim meter, and hour meter.
Step-by-step guide for starting, warming up, and operating the engine.
Diagnosing and resolving problems with starting, power, and idling.
Procedures for impact damage, emergency actions, and replacing fuses.
General| Engine Type | 4-Stroke |
|---|---|
| Displacement | 747 cc |
| Cylinder Configuration | Inline 3 |
| Fuel Induction System | EFI (Electronic Fuel Injection) |
| Max Output | 40 hp |
| Starting System | Electric |
| Full Throttle RPM Range | 5000 - 6000 RPM |
| Steering | Remote |
| Gear Shift | Forward, Neutral, Reverse |
| Bore x Stroke | 65 x 75 mm |
| Fuel Tank Capacity | N/A (External) |
| Shaft Length | 20 in |
To Next Page
