What to do if my Yamaha FJR1300 Motorcycle has starting problems and the engine turns over slowly?
If your Yamaha Motorcycle experiences starting problems or poor engine performance, and the engine turns over slowly, begin by inspecting the battery lead connections. Then, check the vehicle itself. If needed, proceed to charge the battery.
What to do if my Yamaha FJR1300 Motorcycle engine is overheating but the coolant level is OK?
If your Yamaha Motorcycle is overheating and the coolant level is satisfactory, start the engine. Should the overheating persist, it's recommended to have a Yamaha dealer inspect and repair the cooling system.
What to do if my Yamaha Motorcycle battery is good but the engine does not start?
If your Yamaha Motorcycle experiences starting problems or poor engine performance, and the battery is in good condition but the engine still doesn't start, it is recommended to have your Yamaha dealer check the vehicle.
How to fix wet spark plugs on a Yamaha FJR1300 Motorcycle?
If your Yamaha Motorcycle experiences starting problems or poor engine performance, and the spark plugs are wet, wipe them off with a dry cloth. Also, correct the spark plug gaps, or replace the spark plugs.
What to do if my Yamaha FJR1300 won't start and there is no fuel?
If your Yamaha Motorcycle experiences starting problems or exhibits poor engine performance, and there is no fuel, supply fuel to the engine.
Details the location and function of handlebar controls and dashboard instruments.
Explains the vehicle's anti-theft immobilizer system and key usage.
Describes the operation of the main switch for ignition, lighting, and steering lock.
Details the function of various dashboard indicator and warning lights.
Describes the multi-function display features and the self-diagnosis system.
Explains the Anti-lock Brake System features and operation for the FJR1300A model.
Explains the functions and checks for the ignition circuit cut-off safety system.
A comprehensive list of items to check before each ride for safety and performance.
Procedures and safety precautions for starting the motorcycle's engine.
The schedule of recommended checks, lubrication, and service intervals.
Steps for checking engine oil level and changing the oil and filter cartridge.
Procedures for checking final gear oil level and performing oil changes.
How to check the coolant level in the reservoir and radiator.
Guidance on checking and adjusting tire air pressure for safe riding.
How to check the wear on front and rear brake pads.
Checking front/rear brake and clutch fluid levels for proper operation.
Information on battery charging, storage, and safety precautions.
Diagnostic charts for starting problems, poor engine performance, and overheating.
Steps to diagnose and resolve engine overheating issues.
Technical specifications including dimensions, engine type, and displacement.
General| Displacement | 1298cc |
|---|---|
| Compression Ratio | 10.8:1 |
| Final Drive | Shaft |
| Wheelbase | 60.8 in |
| Fuel Capacity | 6.6 gal |
| Bore x Stroke | 79.0mm x 66.2mm |
| Fuel System | Fuel Injection |
| Ignition | TCI |
| Rear Suspension | Single shock, 4.9-in travel |
| Front Brakes | Dual 320mm discs |
| Rear Brakes | 282mm disc |
| Front Tire | 120/70ZR17 |
| Rear Tire | 180/55ZR17 |
| Seat Height | 31.7 in or 32.5 in |
| Curb Weight | 642 lb |
To Next Page
