Yamaha FX Audio Kit - Steps 4-7: Speaker Mounting and Securing; Step 8: Repeat Installation; Product Care and Service; Maintenance

7/2019 F3X_H81E0_T0_A MANUAL, INSTALL
AUDIO SET
Page 3 of 3
©Yamaha Motor Corporation, U.S.A. All rights reserved.
CARE AND CLEANING:
Clean plastic parts with a clean soft cloth and mild soap
and water. Rinse and dry. Always rinse with freshwater
after salt water use.
CUSTOMER SERVICE:
For further information see your Yamaha dealer.
ESTIMATED TIME TO INSTALL: 0.2 HRS
5. Put speaker in mount base.
4. Pull quick-release knob and turn 90 degrees
into indentation.
8. Repeat steps for the other side of the WaveRunner
®
.
MAINTENANCE:
Periodically, check torque on all hardware. If loose
hardware is found, re-torque to specification.
6. Position speaker to desired angle / direction.
7. Turn quick-release knob back to original position. Seat
the knob into the indentation. Confirm it is fully
seated and no red color is visible.