28
Function and operation of components
■ Brightness
The brightness of the Digital Network Gauge
(6Y9) display can be adjusted in 5 levels us-
ing the “Dimmer” function. Changing the
brightness of the gauge will also change the
alert indicators on the EKS panel, remote
control and joystick control. Dual station in-
stallations: The brightness must be adjusted
at each station.
The “Dimmer” is set to level 5 by default.
■ Tone
The sound level emitted when the gauge but-
tons are pressed can be adjusted using the
“Button Sound” function. Dual station instal-
lations: The sound must be adjusted at each
station.
The “Button Sound” is set to level 3 by de-
fault.
■ Favorites
Rudder angle is shown in Selection items “1”
and “2”.
■ Depth Alarms
A shallow water alarm can be set to warn
when the water depth is less than the mini-
mum set in the gauge (optional Multisensor
required). The deep alarm is not functional.
■ Units
The units for measuring speed, distance, ca-
pacities and temperature can be set for ei-
ther metric or English standards (miles,
gallons). American Boating and Yacht Coun-
cil (ABYC) uses English Standard units.
0KAW_dtp_data_US.book Page 28 Monday, December 17, 2012 3:35 PM
To Next Page
Loading...