Maintenance
90
7. Remove the apron from starboard side
as shown in the illustration.
8. Remove the oil filler cap.
9. Prepare a suitable container that holds a
larger amount than the engine oil capac-
ity. Remove the drain screw and gasket
while holding the container under the
drain hole. Let the oil drain completely.
Wipe up any spilled oil immediately.
If the oil does not drain easily, change the tilt
angle or turn the outboard motor to port and
starboard to drain the oil.
10. Put a new gasket on the drain screw.
1. Bolt
1. Apron
1. Oil filler cap
1. Drain screw
2. Gasket
6CE-9-36-1E0.book 90 ページ ２０１４年１１月２８日 金曜日 午後２時５５分
©2019 Yamaha Motor Corporation, U.S.A.
To Next Page
Loading...
