Yamaha Commercial Audio M7CL StageMix User Guide V1.5
Page 19
5.0 Troubleshooting
5.1 No WiFi Available
If this message appears after launching StageMix, this indicates that the iPad
is not connected to a WiFi access point or that WiFi may be switched off in the
iPad. Refer to sections 2.0 and 3.2 for details about WiFi hardware
configuration and iPad WiFi settings.
5.2 Connection Failed to M7CL
If this message appears after selecting a mixer and pressing [CONNECT],
this indicates that StageMix cannot connect to the M7CL console. This may be
due to incorrect IP Address or MAC Address settings in either the M7CL or
StageMix. Verify that the settings in the M7CL match the settings in StageMix.
Refer to 3.1 and 3.3.2 for details about these settings. This problem will also
occur if the M7CL console is not turned on.
To Next Page
Loading...
