Need help?Do you have a question about the Yamaha MG Series and is the answer not in the manual?
General| Series | MG Series |
|---|---|
| Type | Analog Mixer |
| Number of Channels | Varies by model (e.g., MG06, MG10, MG12, MG16, MG20) |
| Mic Inputs | Varies by model |
| Phantom Power | +48V (switchable on some models) |
| Aux Sends | Varies by model |
| Built-in Effects | SPX Digital Effects (on XU models) |
| USB Interface | Available on some models (e.g., MG10XU, MG12XU) |
| Inputs | XLR, 1/4" TRS, RCA (varies by model) |
| Outputs | XLR, 1/4" TRS, RCA (varies by model) |
| Microphone Preamps | D-PRE discrete Class-A mic preamps |
| Signal-to-Noise Ratio | Approx. -128dB (EIN) |
| Dimensions | Varies by model |
| Weight | Varies by model (e.g., MG10: 2.2 kg) |
Lists essential safety guidelines for operating the mixing console, covering power, opening the unit, water, and fire hazards.
Warns against exposing the apparatus to rain or moisture to prevent fire or electric shock.
Details FCC regulations, modification warnings, and instructions for handling interference with electronic devices.
Provides specific instructions for connecting the mains lead wires based on color coding for safety.
Details critical warnings regarding electrical shock, short circuits, fire, and improper handling of power cords.
Provides cautions on device placement, ventilation, avoiding heat sources, and proper connection practices.
Instructs users on immediate actions to take if the device exhibits unusual smells, smoke, or operational failures.
Highlights the D-PRE Class-A microphone preamplifiers and operational amplifiers for high-quality audio reproduction.
Step-by-step instructions on how to prepare the unit's power supply before operation.
Guides on connecting audio devices and safely powering up the mixing console and connected equipment.
Details the process of routing signals to speakers and adjusting levels for initial sound output.
Guides on selecting and applying built-in effects, adjusting depth, and using parameter controls.
Demonstrates a typical setup for live performances, showing connections for various instruments and speakers.
Illustrates a setup configuration for events and parties, connecting sources like DJ mixers and DVD players to the console.
Guides on verifying correct connections, cable integrity, and signal routing through channels to buses for sound output.
Provides guidance on setting gain, switches, faders, and using level meters to troubleshoot sound balance issues.
Addresses common problems like no power, low/distorted sound, effects not applying, and inconsistent levels, offering solutions.
To Next Page
