Controllers supported by the MO
71
Owner’s Manual
Quick GuideUsing the Controllers—Advanced Course
Controlling the overall system with ASSIGN A and B
The ASSIGN A and B (Knob 1 and 2) settings let you control the functions that affect all Voices, Performances, Song, and
Pattern.
You can store the ASSIGN A and B settings as the system settings by pressing the [STORE] button.
n ASSIGN A and B are common to all Voices/Performances/Songs/Patterns. Changing the setting of ASSIGN A and B may result in changes to the data
of stored User Voices/Performances/ Songs/Patterns.
1 ASSIGN A, ASSIGN B
Determines the Control Change numbers generated when controlling the ASSIGN A and B (Control sliders 1 and 2).
Normally, there is no need to change these parameters. The conventional parameter assignments (as defined in the MIDI
standard) used for the control numbers are indicated in parentheses.
2 Destination (function)
Determines the functions assigned to ASSIGN A and B. For the details about the abbreviations and the parameter types,
refer to the Control List in the separate Data List booklet.
[UTILITY] ➞ [F4] CTL ASN ➞ [SF2] ASSIGN (page 208)
1
2
To Next Page
Loading...
