Yamaha MOTIF ES6 - Connections; Connecting to External Audio Equipment

AUTO PAN
AUTO PAN2
ROTARY SPEAKER
DISTORTION+ROTARY SPEAKER
OVERDRIVE+ROTARY SPEAKER
AMP SIMULATOR+ROTARY SPEAKER
2WAY ROTARY SPEAKER
DISTORTION+2WAY ROTARY SPEAKER
OVERDRIVE+2WAY ROTARY SPEAKER
AMP SIM.+2WAY ROTARY SPEAKER
DUAL ROTOR SPEAKER 1
DUAL ROTOR SPEAKER 2
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 L/R Depth 0 – 127 (0 – 127)
03 F/R Depth 0 – 127 (0 – 127)
04 PAN Direction L<>R, L>>R, L<<R, Lturn,
Rturn, L/R
(0 – 5)
06 – 09: Same as marked with *.
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 L/R Depth 0 – 127 (0 – 127)
03 F/R Depth 0 – 127 (0 – 127)
04 PAN direction L<>R, L>>R, L<<R, Lturn,
Rturn, L/R
(0 – 5)
02 LFO Wave 0 – 28 (0 – 28)
06 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
07 EQ Low Gain -12dB – +12dB (52 – 76)
08 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
09 EQ High Gain -12dB – +12dB (52 – 76)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
15 Input Mode Mono/Stereo (0 – 1)
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 LFO Depth 0 – 127 (0 – 127)
06 – 09: Same as marked with *.
10 Dry / Wet Balance D63>W – D=W – D<W63 (1 – 127)
11 EQ Mid Frequency 100Hz – 10.0kHz (14 – 54) 3
12 EQ Mid Gain -12dB – +12dB (52 – 76)
13 EQ Mid Width 0.1 – 12.0 (1 – 120)
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 LFO Depth 0 – 127 (0 – 127)
06 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
07 EQ Low Gain -12dB – +12dB (52 – 76)
08 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
09 EQ High Gain -12dB – +12dB (52 – 76)
14 Dist. Drive 0 – 127 (0 – 127)
15 Dist. LPF Cutoff Freq 1.0kHz – 20.0kHz (34 – 60) 3
16 Dist. Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 LFO Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 LFO Depth 0 – 127 (0 – 127)
03 AMP Type off, stack, combo, tube (0 – 3)
06 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
07 EQ Low Gain -12dB – +12dB (52 – 76)
08 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
09 EQ High Gain -12dB – +12dB (52 – 76)
14 AMP Drive 0 – 127 (0 – 127)
15 AMP LPF Cutoff Freq 1.0kHz – 20.0kHz (34 – 60) 3
16 AMP Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 Rotor Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 Drive Low 0 – 127 (0 – 127)
03 Drive High 0 – 127 (0 – 127)
04 Low / High Balance L63>H – L=H – L<H63 (1 – 127)
06 – 09: Same as marked with *.
11 Divide Frequency 100Hz – 10.0kHz (14 – 54) 3
12 Mic L-R Angle 0deg – 180deg (0 – 60)
No. Parameter Range Value Table No.
01 Rotor Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 Drive Low 0 – 127 (0 – 127)
03 Drive High 0 – 127 (0 – 127)
04 Low/High Balance L63>H – L=H – L<H63 (1 – 127)
06 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
07 EQ Low Gain -12dB – +12dB (52 – 76)
08 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
09 EQ High Gain -12dB – +12dB (52 – 76)
11 Divide Frequency 100Hz – 10.0kHz (14 – 54) 3
12 Mic L-R Angle 0deg – 180deg (0 – 60)
14 Dist. Drive 0 – 127 (0 – 127)
15 Dist. LPF Cutoff Freq 1.0kHz – 20.0kHz (34 – 60) 3
16 Dist. Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 Rotor Speed 0.0Hz – 39.70Hz (0 – 127) 1
02 Drive Low 0 – 127 (0 – 127)
03 Drive High 0 – 127 (0 – 127)
04 Low/High Balance L63>H – L=H – L<H63 (1 – 127)
06 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
07 EQ Low Gain -12dB – +12dB (52 – 76)
08 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
09 EQ High Gain -12dB – +12dB (52 – 76)
11 Divide Frequency 100Hz – 10.0kHz (14 – 54) 3
12 Mic L-R Angle 0deg – 180deg (0 – 60)
13 AMP Type off, stack, combo, tube (0 – 3)
14 AMP Drive 0 – 127 (0 – 127)
15 AMP LPF Cutoff Freq 1.0kHz – 20.0kHz (34 – 60) 3
16 AMP Output Level 0 – 127 (0 – 127)
No. Parameter Range Value Table No.
01 Rotor Speed Slow 0.0Hz – 2.65Hz (0 – 63) 1
02 Horn Speed Slow 0.0Hz – 2.65Hz (0 – 63) 1
03 Rotor Speed Fast 2.69Hz – 39.70Hz (64 – 127) 1
04 Horn Speed Fast 2.69Hz – 39.70Hz (64 – 127) 1
05 Slow-Fast Time of R 0 – 127 (0 – 127)
06 Slow-Fast Time of H 0 – 127 (0 – 127)
07 Drive Low 0 – 127 (0 – 127)
08 Drive High 0 – 127 (0 – 127)
09 Low/High Balance L63>H – L=H – L<H63 (1 – 127)
11 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
12 EQ Low Gain -12dB – +12dB (52 – 76)
13 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
14 EQ High Gain -12dB – +12dB (52 – 76)
15 Mic L-R Angle 0deg – 180deg (0 – 60)
16 Speed Control slow, fast (0 – 1)
No. Parameter Range Value Table No.
01 Rotor Speed Slow 0.0Hz – 2.65Hz (0 – 63) 1
02 Horn Speed Slow 0.0Hz – 2.65Hz (0 – 63) 1
03 Rotor Speed Fast 2.69Hz – 39.70Hz (64 – 127) 1
04 Horn Speed Fast 2.69Hz – 39.70Hz (64 – 127) 1
05 Slow-Fast Time of R 0 – 127 (0 – 127)
06 Slow-Fast Time of H 0 – 127 (0 – 127)
07 Drive Low 0 – 127 (0 – 127)
08 Drive High 0 – 127 (0 – 127)
09 Low/High Balance L63>H – L=H – L<H63 (1 – 127)
11 EQ Low Frequency 32Hz – 2.0kHz (4 – 40) 3
12 EQ Low Gain -12dB – +12dB (52 – 76)
13 EQ High Frequency 500Hz – 16.0kHz (28 – 58) 3
14 EQ High Gain -12dB – +12dB (52 – 76)
15 Mic L-R Angle 0deg – 180deg (0 – 60)
16 Speed Control slow, fast (0 – 1)
Data List
31
Effect Parameter List