Yamaha MT-01 - Checking the Oil Pipes; Checking the Oil Strainer; Installing the Oil Tank

ENGINE REMOVAL
5-2
ET5YU1027
CHECKING THE OIL PIPES
1. Check:
• Oil pipes
Damage → Replace.
Obstruction → Wash and blow out with com-
pressed air.
ET5YU1028
CHECKING THE OIL STRAINER
1. Check:
• Oil strainer (oil tank)
Damage → Replace.
Contaminants → Clean with engine oil.
ET5YU1019
INSTALLING THE OIL TANK
1. Install:
• Oil tank
NOTE:
Tighten the oil tank bolts in the proper tightening
sequence as shown.
T
R
.
.
Oil tank bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
1
5
7
3
2
6
8
4
10
16
15
13
11
14
12
9
Manuals by Motomatrix / www.motomatrix.co.uk
Email: info@motomatrix.co.uk