For your safety – pre-operation checks
4-3
4
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
3-24
ITEM CHECKS PAGE
UBU2E0E0.book Page 3 Friday, September 9, 2016 9:23 AM
To Next Page
Loading...
