Periodic maintenance and adjustment
8-31
8
4. Install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
5. Insert the fuse puller, and then in-
stall the fuse box cover.
6. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
7. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
ECA27210
Do not drive while the fuse box cov-
er is removed.
1. Fuse puller
Specified fuses:
Main fuse:
50.0 A
Terminal fuse 1:
2.0 A
Headlight fuse:
7.5 A
Signaling system fuse:
7.5 A
Ignition fuse:
10.0 A
Ignition fuse 2:
7.5 A
Radiator fan motor fuse:
15.0 A
ABS motor fuse:
30.0 A
ABS ECU fuse:
7.5 A
Fuel injection system fuse:
7.5 A
ABS solenoid fuse:
15.0 A
Backup fuse:
7.5 A
Backup fuse 2:
15.0 A
Electronic throttle valve fuse:
7.5 A
UB7N12E0.book Page 31 Tuesday, August 23, 2022 10:08 AM
To Next Page
Loading...
