Yamaha MT-10 2021 - Page 36

Instrument and control functions
5-8
1
2
3
4
5
6
7
8
9
10
11
12
13
a revolution peak hold indicator
which can be turned on or off.
NOTICE
ECA10032
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11800 r/min and above
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear from
“F” (full) towards “E” (empty) as the fuel
level decreases.
When the last segment starts flashing,
or the fuel level warning icon comes on,
refuel as soon as possible.
TIP
 If all the fuel meter display seg-
ments flash repeatedly, have a
Yamaha dealer check the related
circuits.
 When the Yamaha variable speed
limiter (YVSL) system is operating
in STREET MODE, the fuel meter
is replaced by the YVSL display.
(See page 4-8.)
Clock
The clock uses a 12-hour time system.
Transmission gear display
This shows which gear the transmis-
sion is in. This model has 6 gears and a
neutral position. The neutral position is
indicated by the neutral indicator light
“ ” and by the transmission gear dis-
play “ ”.
TIP
When the Yamaha variable speed lim-
iter (YVSL) system is operating in
TRACK MODE, the transmission gear
display is replaced by the YVSL dis-
play. (See page 4-8.)
Revolution peak hold indicator
This small bar momentarily appears
within the tachometer to mark the most
recent peak engine speed.
1. Fuel meter
2. YVSL display
LIM
MPH
1 2
1. Transmission gear display
2. YVSL display
LIM
MPH
N
GEAR
1 2
B5Y-9-10-E0.book 8 ページ ２０２１年１２月１５日 水曜日 午後１時３０分