Yamaha MT-25 - Sidestand Switch Operation Check

5-3
5
For your safety – pre-operation checks
Chassis fasteners
t Make sure that all nuts, bolts and screws are properly tightened.
t Tighten if necessary.
—
Instruments, lights, signals
and switches
t Check operation.
t Correct if necessary.
—
Sidestand switch
t Check operation of ignition circuit cut-off system.
t If system is not working correctly, have Yamaha dealer check vehicle.
4-18
EGAPSKCEHCMETI
Sidestand
t Make sure that operation is smooth.
t Lubricate pivot if necessary.
7-26