Yamaha MTX5-D - Page 8

AMX Control Module for: MTX5-D Matrix Processor Rev.1
8
Send Commands & Status Strings
Each command is listed below with the (indented) status command that will be yielded from the command. In most
events, the status message will update multiple parameters at once – the commands and returns are grouped
below for easier documentation.
To query the status, put a “?” in place of the ‘=’ sign of any command leave the value eld off. The module will
query the status and return a string for you.
Effect:Patch=<Proc 1-2>:<1-4|+|->
Effect:Param=<Proc 1-2>:<0-1000|+|->
Effect=Proc <1-2>:Patch <1-4>,Param <0-1000>
HeadAmp:Gain=<In 1-8>:<0-1000|+|->
HeadAmp:48V=<In 1-8>:<0-1|T>
HeadAmp=In <1-8>:Phantom <0 Off|1 On>,Gain <0-1000>
Input:AGC:ResponseTime=<In #>:<0-1000|+|->
Input:AGC:CompensationLevel=<In #>:<0-1000|+|->
Input:AGC:NoiseGate=<In #>:<0-1|T>
Input:AGC:On=<In #>:<0-1|T>
Input:AGC=In <1-8>: ResponseTime <0-1000>,Level <0-1000>,
NoiseGate <0 Off|1 On>,On <0 Off|1 On>
Input:Comp:Threshold=<In #>:<0-1000|+|->
Input:Comp:Ratio=<In #>:<0-1000|+|->
Input:Comp:Knee=<In #>:<0-1000|+|->
Input:Comp:Attack=<In #>:<0-1000|+|->
Input:Comp:Release=<In #>:<0-1000|+|->
Input:Comp:Gain=<In #>:<0-1000|+|->
Input:Comp:On=<In #>:<0-1|T>
Input:Comp=In <1-16|25-28>: Threshold <0-1000>,Ratio <0-1000>,Knee <0-1000>,Attack <0-1000>,
Release <0-1000>,Gain <0-1000>,On <0 Off|1 On>
Input:EQ:BandBypass=<In #>,<Band 1-3>:<0-1|T>
Input:EQ:Freq=<In #>,<Band 1-3>:<0-1000|+|->
Input:EQ:Gain=<In #>,<Band 1-3>:<0-1000|+|->
Input:EQ:On=<In #>:<0-1|T>
Input:EQ:Q=<In #>,<Band 1-3>:<0-1000|+|->
Input:EQ:Type=<In #>,<Band 1|3>:<1-7>
Input:EQ=In <1-16|25-30>,Band <1-3>: Gain <0-1000>,Freq <0-1000>,Q <0-1000>,
Type <1-7>, BandBypass <1 (BYPASS)|0 (ENGAGE)>
Input:EQ:On=<In #>:<0-1|T>
Input:EQ:On=In <1-16|25-30>:On <0 Off|1 On>
Input:FBS:Dynamic:Clear=<In #>
Input:FBS:Fixed:On=<In #>:<0-1|T>
Input:FBS:Dynamic:On=<In #>:<0-1|T>
Input:FBS=In <1-8>:FixedOn <0 Off|1 On>:DynamicOn <0 Off|1 On>