12
Configuring your MusicCAST network
This quick manual describes how to use the Auto Configuration functionality of the MusicCAST system. For more
detailed information on how to use the manual configuration options of the MusicCAST system refer to the
sections on network configuration in the MusicCAST client and MCX-1000 owner’s manuals.
Carry out the procedure described below to configure your MusicCAST system network settings using the Auto
Configuration function. You can carry out Auto Configuration from multiple locations if necessary, but you may find
it convenient to gather all of your MusicCAST components in one place for this procedure.
Using the Auto Configuration function
MusicCAST server
1 Press TOP MENU.
The Top Menu screen appears on the on-screen display.
MusicCAST server
2 Use / to move the cursor to “System Setup”
and press SELECT.
The System Setup screen appears on the on-screen display of
your MusicCAST server.
MusicCAST server
3 Use / to move the cursor to “Network” and
press SELECT.
The Network screen appears on the on-screen display of your
MusicCAST server.
MusicCAST server
4 Use / to move the cursor to “Auto
Configuration” and press SELECT.
The following message appears on the on-screen display of
your MusicCAST server.
Configuring your network
To Next Page
Loading...
Need help?
General
