Yamaha NP-S303 User Manual (English)

Other manuals for Yamaha NP-S303

Owner's Manual56 pages

Quick Start Guide136 pages

Questions and Answers:

J
Jacob CharlesJul 27, 2025
Why Yamaha NP-S303 power does not turn on?
- A
  Anthony MoonJul 27, 2025
  There are several reasons why your Yamaha Media Player might not be turning on. It could be due to the protection circuitry being activated multiple times, in which case you should contact your Yamaha dealer or service center for repair. Alternatively, the power cord may not be properly connected, so ensure it's firmly plugged in. Lastly, the internal microcomputer might have frozen due to an electrical shock or power supply voltage drop; try disconnecting the power cord for 15 seconds and then plugging it back in.
S
Shirley JenkinsAug 1, 2025
What to do if Yamaha NP-S303 has no sound?
- N
  Nathaniel MilesAug 1, 2025
  If you're experiencing no sound from your Yamaha Media Player, first check that the cables are properly connected to both the unit and the amplifier. If the problem continues, the cables might be defective and need replacement. Also, ensure that neither the unit nor the amplifier is muted by pressing the MUTE button.
B
bauerdianeAug 6, 2025
What to do if Yamaha NP-S303 remote control does not work?
- B
  Brian AdamsAug 6, 2025
  If your Yamaha Media Player's remote control isn't working correctly, make sure you're within the operative range and angle. Also, check if direct sunlight or strong lighting is interfering with the unit's remote control sensor; if so, reposition the lighting or the unit. Finally, the batteries might be weak, so try replacing them.
E
erica28Aug 10, 2025
Why does the sound suddenly go off on my Yamaha Media Player?
- T
  Timothy ParrishAug 11, 2025
  The sound on your Yamaha Media Player might suddenly go off because the Auto Power Standby function has turned off the power to the unit. To prevent this, set the Auto Power Standby function (“AutoPowerStby” in the Setup menu) to “Off.” Alternatively, the protection circuit may have been engaged. In this case, turn the power to the unit on again.
D
David ChaseAug 16, 2025
What to do if my Yamaha NP-S303 does not turn off?
- K
  kwalkerAug 16, 2025
  If your Yamaha Media Player won't turn off or enter standby mode, the internal microcomputer may have frozen due to an external electrical shock or a drop in power supply voltage. Try disconnecting the power cord from the AC wall outlet, waiting 15 seconds or longer, and then plugging it back in.
R
Ryan WigginsAug 21, 2025
How to turn on Yamaha Media Player if the remote doesn't work?
- R
  Rodney MillerAug 21, 2025
  If pressing the power button on the remote control does not turn on your Yamaha Media Player, it may be turned off. To turn on the power to the unit, press the power button on the front panel.

Yamaha NP-S303 Specifications

General

Audio formats supported	AAC, AIFF, ALAC, DSD, FLAC, MP3, WAV, WMA
Video formats supported	MPEG4
Sample rate	192 kHz
Phono inputs (RCA)	1
Composite video out	-
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out	0
Power consumption (standby)	1.5 W
Product color	Black
Volume control	Rotary
Image formats supported	Not supported
Internet radio services supported	Deezer, JUKE, Napster, Qobuz, Spotify, Tidal
Audio output channels	- channels
Total storage capacity	- GB

Weight and Dimensions

Depth	289 mm
Width	435 mm
Height	87 mm
Weight	2700 g

Related product manuals

Yamaha NP-S2000

38 pages

Yamaha NP-S303 User Guide

Table of Contents

Other manuals for Yamaha NP-S303

Questions and Answers:

Yamaha NP-S303 Specifications

Related product manuals