Yamaha PF-1000 User Manual (English)

Other manuals for Yamaha PF-1000

Service Manual111 pages

Data List36 pages

Questions and Answers:

C
cynthia45Aug 20, 2025
Why is the overall volume low or no sound heard on my Yamaha Synthesizer?
- L
  lisadawsonAug 20, 2025
  Several factors could be at play here. Ensure the Master Volume is appropriately set using the [MASTER VOLUME] dial. Check that the volume levels for individual parts (MAIN, LAYER, LEFT, STYLE, and SONG) are not set too low in the BALANCE display. Also, verify the desired channel is set to ON. If headphones are connected, unplug them to enable speaker output. Confirm the speaker setting is set to ON and that the Local Control function is also set to ON.
W
Wendy HinesAug 22, 2025
What to do if accompaniment style or song playback does not start on Yamaha Synthesizer?
- S
  sampsonsaraAug 22, 2025
  If your accompaniment style or song playback isn't starting, first ensure that MIDI Clock is set to “INTERNAL.” Then, make sure you've pressed the appropriate [START/STOP] button. To play an accompaniment style, press the STYLE CONTROL [START/STOP] button; to playback a song, press the SONG [START/STOP] button. Also, ensure that you have selected an appropriate song in the SONG display, and if the song has stopped at the end, return to the beginning by pressing the [TOP] button.
R
Renee ThomasAug 25, 2025
Why is the keyboard volume low compared to auto accompaniment on my Yamaha Synthesizer?
- A
  Abigail JordanAug 25, 2025
  The keyboard volume might be set too low. Try raising the MAIN/LAYER/LEFT volume voices or lowering the STYLE/SONG volume in the BALANCE display.
P
parklauraAug 26, 2025
What to do if the sound is distorted or noisy on my Yamaha Synthesizer?
- S
  Sheila ChandlerAug 26, 2025
  If the sound from your Yamaha Synthesizer is distorted or noisy, ensure that all volume settings are appropriate and not set too high. Also, try canceling any unnecessary effects, particularly distortion-type effects. If you're using the Custom Voice Creator, adjust any filter resonance settings that might be causing the distortion.
M
mfrankAug 27, 2025
What to do if the damper pedal has no effect on Yamaha Synthesizer?
- K
  Karen Kemp DVMAug 27, 2025
  If the damper pedal isn't working or the sound sustains continuously, make sure the pedal plug is securely inserted into the proper jack.
W
wdownsAug 29, 2025
Why is the volume of auto accompaniment low on my Yamaha Synthesizer?
- T
  travis46Aug 29, 2025
  If the volume of the Auto Accompaniment or song playback is too low, the volume level of one or more accompaniment parts or song channels may be set too low. Raise the part or channel level(s) in the appropriate MIXER display.
N
Nicole JenkinsAug 31, 2025
What to do if my Yamaha Synthesizer PF-1000 does not turn on?
- P
  Paul GarciaAug 31, 2025
  Make sure that the PF-1000 has been plugged in properly. Securely insert the female plug into the AC socket on the PF-1000, and the male plug into a proper AC outlet.
J
Jennifer Aguirre PhDSep 2, 2025
Why does only the rhythm channel play on my Yamaha Synthesizer?
- D
  dana57Sep 2, 2025
  Make sure the Auto Accompaniment function is turned on by pressing the [ACMP] button.
A
antonio63Sep 3, 2025
What to do if some channels do not properly play back song data on Yamaha Synthesizer?
- M
  mcdonaldjohnSep 4, 2025
  Make sure that playback of the relevant channel(s) is turned on.
D
Donald BlakeSep 5, 2025
What to do if not all notes sound on my Yamaha Synthesizer?
- J
  Jessica ThomasSep 6, 2025
  You may be exceeding the maximum polyphony of the PF-1000. When this happens, the earliest played notes will stop sounding, letting the latest played notes sound.