Why does the Style on my Yamaha Musical Instrument not sound right?
If the Style does not sound properly on your Yamaha Musical Instrument, ensure that the Style Volume is set to an appropriate level. Also, check if the Split Point is set at an appropriate key for the cords you are playing, and verify that the “ACMP ON” indicator is showing in the display by pressing the [ACMP ON/OFF] button.
What to do if my Yamaha Musical Instrument has low volume and poor sound quality?
If your Yamaha Musical Instrument's volume is too soft, the sound quality is poor, the rhythm stops unexpectedly, recorded data doesn't play correctly, or the LCD display goes dark and resets, the batteries may be low or dead. Replace all six batteries with completely new ones, or use the optional AC adapter.
How to fix no sound on my Yamaha Musical Instrument?
If there is no sound from your Yamaha Musical Instrument, ensure that nothing is connected to the PHONES/OUTPUT jack on the rear panel, as plugging in headphones will prevent sound output. You may also need to check the Local Control setting.
What to do if Style or Song won't play on my Yamaha Musical Instrument?
If the Style or Song does not play back when the [START/STOP] button is pressed on your Yamaha Musical Instrument, make sure External Clock is set to OFF.
Why is the sustain pedal reversed on my Yamaha Musical Instrument?
If the footswitch seems to produce the opposite effect on your Yamaha Musical Instrument, with pressing it cutting off the sound and releasing it sustaining the sounds, the polarity of the footswitch is likely reversed. Ensure that the footswitch plug is properly connected to the SUSTAIN jack before turning on the power.
How to enable harmony on Yamaha Musical Instrument?
If the harmony doesn’t sound on your Yamaha Musical Instrument, consider that the method of sounding the harmony effect differs depending on the selected type. For Types 01-05, turn the Auto Accompaniment on and play it by pressing a chord in the auto accompaniment section of the keyboard, then play some keys in the right-hand side to get the harmony effect. For Types 06-26, turning the Auto Accompaniment on or off has no effect, however, it is necessary to play two notes simultaneously for Types 06-12.
Why doesn't ACMP turn on my Yamaha Musical Instrument?
If the ACMP ON indicator does not appear when the [ACMP ON/OFF] button is pressed on your Yamaha Musical Instrument, always press the [STYLE] button first when you are going to use any style-related function.
Why are some voices cut off on my Yamaha Musical Instrument?
If not all of the voices seem to sound, or the sound seems to be cut off on your Yamaha Musical Instrument, it may be due to the instrument's polyphony limit. If the Dual voice or Split voice is being used and a style or Song is playing back at the same time, some notes/sounds may be omitted (or “stolen”) from the accompaniment or Song.
Why does my Yamaha Musical Instrument make a popping sound when turned on?
This is normal for Yamaha Musical Instrument and indicates that the instrument is receiving electrical power.
Why does the voice sound different on each note on my Yamaha Musical Instrument?
This is normal. The AWM tone generation method uses multiple recordings (samples) of an instrument across the range of the keyboard; thus, the actual sound of the voice may be slightly different from note to note on your Yamaha Musical Instrument.
General| Number of Keys | 61 |
|---|---|
| Keyboard Type | Standard |
| Touch Sensitivity | Yes |
| Polyphony | 32 |
| Display | LCD |
| Amplifiers | 2.5W + 2.5W |
| Speakers | 12 cm x 2 |
| Effects | Reverb, Chorus |
| Connectors | Headphones, AUX IN, USB |
| Power Supply | AC Adaptor |
Essential safety precautions to prevent injury, damage, fire, and other hazards from electrical shock.
Instructions for powering, connecting peripherals, and identifying panel controls and terminals.
Turning power on, adjusting volume, and understanding the LCD display.
A guide to identifying and resolving common instrument issues.
To Next Page
