Why does my Yamaha Musical Instrument have a strange flanging sound?
If you are experiencing a strange “flanging” or “doubling” sound on your Yamaha Musical Instrument, and the sound changes slightly each time the keys are played, the RIGHT 1 and RIGHT 2 parts are likely both set to “ON” and playing the same Voice. Turn off the RIGHT 2 part or change the Voice of one of the parts.
Why can't I select songs on my Yamaha PSR-SX600 Musical Instrument?
If Songs cannot be selected on your Yamaha Musical Instrument, this may be because the language settings have been changed. Set the appropriate language for the Song file name. If the size of the Song data is large (about 300 KB or greater), the Song cannot be selected because the data is too large to be handled by the instrument.
Why won't my song play on Yamaha PSR-SX600?
If Song playback does not start on your Yamaha Musical Instrument, the Song may have been stopped at the end of the Song data. Return to the beginning of the Song by pressing the SONG [J] (STOP) button. In the case of a Song to which write-protect has been applied, there are some restrictions and playback may not be possible.
Why is the tempo wrong on my Yamaha Musical Instrument?
If the tempo, beat, measure, and music notation are not displayed correctly on your Yamaha Musical Instrument, it may be because some Song data for the instrument has been recorded with special “free tempo” settings.
General| Keyboard Type | 61-key touch response keyboard |
|---|---|
| Amplifiers | 15 W x 2 |
| Speakers | 12 cm x 2 |
| USB Audio Playback | Yes |
| Power Supply | PA-300C or an equivalent recommended by Yamaha |
| Voices | 850 Voices |
| Weight | 8.1 kg (17 lbs 14 oz) |
| Effects | Reverb |
| Connectivity | USB to Host, USB to Device, Aux In |
| Polyphony | 128-note |
| Styles | 415 Preset Styles |
| Display | 4.3-inch TFT Color LCD |
To Next Page
