Need help?Do you have a question about the Yamaha Q2031B and is the answer not in the manual?
General| Brand | Yamaha |
|---|---|
| Model | Q2031B |
| Category | Recording Equipment |
| Language | English |
Covers heat, humidity, dust, shock, and self-repair warnings.
Instructions for power off before connections and careful cable handling.
Guidance on cleaning methods and correct power supply usage.
Specific wiring instructions for UK mains leads.
Details on independent channel control and frequency band divisions.
Information on the high pass filter and its settings.
Overview of input/output connectors and suitable uses.
Notes on mounting the unit in a standard rack.
Controls the unit's power status and indicator light.
Selects boost/cut range for equalization (+/-12dB or +/-6dB).
Enables or bypasses the high pass filter function.
Bypasses the equalizer section for flat response comparison.
Adjusts input sensitivity and output level restoration.
Sets the rolloff frequency for the high pass filter.
Details on 31-band (1/3 octave) and 15-band (2/3 octave) equalizer bands.
LEDs indicating signal presence and peak levels near clipping.
XLR and 1/4" phone jack inputs for balanced audio signals.
XLR and 1/4" phone jack outputs for balanced audio signals.
Shows connection via channel insert points for signal processing.
Illustrates connection in the main stereo output path.
Using pink noise and spectrum analyzer for room response optimization.
Controlling feedback by adjusting specific frequencies in monitor systems.
Physical measurements and rack unit details for the models.
To Next Page
